284 Loading Print Media
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section15.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
Linking Trays
The printer automatically links the trays when you load the same size and type
of print media in them. The first tray will be utilized until the media runs out
after which the next tray will be used.
NOTE: The print media should be the same size and type in each tray.
The SSF cannot be linked to any of the tray sources.
After loading the selected trays with the same size and type of print media,
select the Paper Type setting in the Tray Settings component for each source
(tray).
To disable tray linking change the Paper type in one of the sources (trays) to a
unique value.
NOTE: If different types of print media of the same size are loaded in each tray,
the printer will automatically link them if the paper type is not specified in the
printer driver properties/preferences.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
