Dell 2155cn - Polling Receive; Automatic Dialing; Setting Speed Dial; Speed Dialing

Faxing 407
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section20.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
Polling Receive
You can receive faxes from the remote fax machine when you want to receive it.
1
Press the (Fax) button.
2 Press button until Polling Receive is highlighted, and then press
the
(Set) button.
3 Press or button until On is highlighted, and then press the (Set)
button.
4 Enter the number of the remote machine using the numeric keypad, and then
press the
(Set) button.
NOTE: For information on how to enter the fax number of the remote
machine, see "Sending a Fax Automatically" or "Sending a Fax Manually."
5 Press the (Start) button.
Automatic Dialing
Speed Dialing
You can store up to 200 frequently dialed numbers in speed dial locations
(001–200).
When the speed dial job specified in the delayed fax or redial exists, you cannot
change the speed dial number from the operator panel or Dell Printer
Configuration Web Tool.
Setting Speed Dial
1 Press the (Menu) button.
2 Press button until System Setup is highlighted, and then press the
(Set) button.
3 Press button until Admin Menu is highlighted, and then press the
(Set) button.
4 Ensure that Phone Book is highlighted, and then press the (Set)
button.
5 Ensure that Speed Dial is highlighted, and then press the (Set)
button.
Downloaded from ManualsPrinter.com Manuals