Dell 2155cn - The Output Is too Light

Troubleshooting Guide 689
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section31.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
• Auger mark
• Wrinkled/Stained paper
• Damage on the leading edge of paper
The output is too light
Action Yes No
1 The toner cartridges may be low or need to be
replaced. Confirm the amount of toner left in
each toner cartridge.
a Check the toner level in the Status tab in the
Status Monitor.
b Replace the toner cartridges as necessary.
Does this solve your problem?
The task is
complete.
Go to action 2.
2 If you are using non-Dell brand toner cartridges,
disable the Non-Dell Toner option.
a Launch the Tool Box, and click Non-Dell
Ton er
on the Printer Maintenance tab.
b Ensure that the On check box is not selected.
Does this solve your problem?
The task is
complete.
Go to action 3.
3 Disable the Toner Saving Mode in the printer
driver.
a On the Advanced tab, ensure that the Toner
Saving Mode check box is not selected.
Does this solve your problem?
The task is
complete.
Go to action 4.
Downloaded from ManualsPrinter.com Manuals