244 Dell Printer Configuration Web Tool
IP Filter (IPv4)
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to
the printer.
Values:
Configure
802.1x
Enable IEEE
802.1x
Select the check box to enable IEEE 802.1x
authentication.
Authentication
Method
EAP-MD5 Selects the authentication method to
use for IEEE 802.1x authentication.
EAP-MS-
CHAPv2
PEAP/MS-
CHAPv2
Login Name:
(Device Name)
Sets the login name (device name) for IEEE 802.1x
authentication using up to 128 alphanumeric
characters.
Password Sets the login password for IEEE 802.1x
authentication using up to 128 alphanumeric
characters.
Re-enter
Password
Confirms the set login password.
Access List Address Sets the IP addresses that are permitted or denied
access to the printer. Enter a numeric value between 0
and 255 in each field.
Address Mask Sets the subnet mask that are permitted or denied
access to the printer. Enter a numeric value between 0
and 255 in each field.
Active Mode Reject Rejects printing from specified network
address.
Permit Permits printing from specified network
address.
Disabled Disables the IP Filter feature for the
specified IP address.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
