Dell 2155cn - Page 715

Troubleshooting Guide 713
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section31.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
Action Yes No
1 Ensure that the standard 250-sheet tray is
properly inserted.
Does this solve your problem?
The task is
complete.
Proceed to the
action
corresponding
to the type of
the print media
being used:
• Thick - 2a
• Thin - 2b
• Coated - 2c
• Envelope -
2d
If performing
manual duplex
printing, go to
action 2e.
If using paper
other than the
above or if not
performing
manual duplex
printing, go to
action 2f.
2a Use thick paper that is 216 g/m
2
or less.
Does this solve your problem?
The task is
complete.
Go to action 3a.
2b Use thin paper that is 60 g/m
2
or more.
Does this solve your problem?
The task is
complete.
Go to action 3a.
2c Load coated paper one sheet at a time.
Does this solve your problem?
The task is
complete.
Go to action 3b.
2d Ensure that the envelope is properly loaded in the
Standard 250-sheet tray as instructed in "Loading
Envelopes in the Standard 250-Sheet Tray and the
Optional 250-Sheet Feeder."
Does this solve your problem?
The task is
complete.
Go to action 3c.
Downloaded from ManualsPrinter.com Manuals