Installing Optional Accessories 81
c
Select
Connect to a network
.
d
Select
dell_device
from the network items listed in
Connect to a
network
.
e
Select
Connect Anyway
in the warning dialog box indicating you are
entering an unsecured area.
f
Click
Close
in the dialog box after confirming the connection is a
success.
For Windows Server 2008 R2 and Windows 7:
a
Open
Control Panel
.
b
Select
Network and Internet
.
c
Select
Network and Sharing Center
.
d
Select
Connect to a network
.
e
Select
dell_device
from the network items listed in the available
network list, and click
Connect
.
2
Check the IP address assigned by AutoIP on the printer.
a
Press the
(Menu)
button.
b
Press button until
System Setup
is highlighted, and then press
the
(Set)
button.
c
Press button until
Admin Menu
is highlighted, and then press the
(Set)
button.
d
Press button until
Network
is highlighted, and then press the
(Set)
button.
e
Press button until
TCP/IP
is highlighted, and then press the
(Set)
button.
f
Press button until
IPv4
is highlighted, and then press the
(Set)
button.
Check the IP address displayed on the operator panel.
3
Check that the IP address on your computer is assigned by DHCP.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
