118
Flow Control
This drop-down configures the data flow control. Available choices are No Flow Control,
CTS/RTS (hardware handshake), and XON/XOFF.
Baud Rate
This drop-down determines the maximum rate in bits per second at which the data can be
transmitted through the serial port. Available baud rates are 9600, 19200, 38400, 57600, and
115200 bps.
Stop Bits
This drop-down determines the number of stop bits to use when transmitting page data. The
choices are 1 or 2 stop bits.
Data Bits
This drop-down determines the number of data bits to use when transmitting page data. The
choices are 7 or 8 data bits.
Parity
This drop-down determines the parity type that is used when transmitting the page data. The
choices are None, Odd, or Even.
Call Retries
This edit box is the number of times to retry calling the destination specified by the destination dial
string. A value of zero indicates no retries (the call is only made once).
Enter a value between 0 and 7.
To Next Page
Loading...
