50
3 Configuration Software and Utilities
Utilities / Drivers on Resource CD
The Resource CD included with your server system includes the following utilities and drivers that
can be used to configure your system:
• LSI Logic SCSI Driver for Linux (64-bit) and Microsoft Windows* 2003 Server
• Utilities:
FRUSDR Loader
EFI Platform Diagnostics
System Maintenance Utility (SMU)
• SDRViewer
• SELViewer
• EFI Configuration Tool
The Resource CD includes a menu-driven program that can be used for the following:
• Create a diskette containing drivers for various operating systems.
• Install EFI Service Partition. The EFI service partition provides the ability to remotely access
the server via modem or LAN for the purpose of executing configuration/setup utilities and
diagnostics.
• Run EFI-based utilities.
Running Software Utilities Directly from the Resource CD
The following procedure allows you to run the software utilities directly from the Resource CD.
1. Insert the System Resource CD into the server’s CD-ROM drive before booting to EFI Shell.
2. Boot the system into EFI Shell; the EFI CD menu program launches automatically. If the EFI
CD menu program does not launch in the EFI Shell, mount and map to the CD drive and type
startup and press <Enter> to launch the EFI CD menu.
3. Move the curser to the Utilities and select the utility you want to run.
Power-on Sequence and Power-on Self-Test (POST)
Turning on the system causes POST to run and control to pass to the boot manager. From the boot
manager, you can choose to invoke the Extensible Firmware Interface (EFI) Shell or you can
choose to go to the Boot Maintenance menu.
To Next Page
Loading...
