Dell 3250 - Installing the DVD-ROM;CD-ROM Drive; Figure 73. Assembling the DVD;CD-ROM Drive and Carrier

194
Installing the DVD-ROM/CD-ROM Drive
Refer to Figure 73 and use the following instructions to install a DVD-ROM/CD-ROM drive into
the drive carrier.
1. Place the drive and carrier on an ESD-protected work surface.
2. Record the drive model and serial numbers in your equipment log.
3. Place the drive in the drive carrier as shown in the figure.
4. Verify the tabs in the drive carrier align with the corresponding mounting holes in the drive
5. Snap the drive into its position in the drive carrier.
6. Slide the DVD-ROM/CD-ROM drive assembly forward into the peripheral bay and fasten the
carrier retaining screw.
7. Continue with Installing the Peripheral Board.
Figure 73. Assembling the DVD/CD-ROM Drive and Carrier