228
Memory Test Failure
No Memory Found in the System
This indicates that the memory test has found no valid memory in the system. The system will not
boot. An SEL log entry is made.
Mismatched DIMMs Within Single Row Populated
This indicates that only a single row is populated, and that the row contains mismatched DIMMs,
preventing booting. An SEL log entry is made.
Recovery Beep Codes
Table 52. Recovery Mode Beep Codes
Beeps Description
One short – medium tone BIOS Flash Update Started
Two short – medium tone BIOS Flash Update Complete
Repeating – low tone BIOS Recovery Error Occurred