155
Command Switches Description
-V
Causes the BMC to return a high level version of the system health
status in multi-line verbose format. The BMC returns a string of the
following format:
SYS Health:xx<output termination sequence>
Power: ON, OFF (soft-off or mechanical off), SLEEP (sleep - used
when it cannot distinguish sleep level), S4, S3, S2, S1, Unknown
Temperature:xx<output termination sequence>
Voltage:xx<output termination sequence>
PowerSystem:xx<output termination sequence>
Cooling:xx<output termination sequence>
Drives:xx<output termination sequence>
Security:xx<output termination sequence>
Other:xx<output termination sequence>
Where xx is:
• OK: monitored parameters within normal operating ranges
• Non-critical: warning: hardware outside normal operating range
• Critical: fatal hardware exceeding specified ratings
• Non-recoverable: potential damage: system hardware in
jeopardy or damaged
• Unspecified fault: fault detected, but severity unspecified
• Unknown: status not available/unknown (typically because
system power is OFF)
To Next Page
Loading...
