Dell 3250 - Page 53

53
Option Description
zero disables the timeout feature.
To set auto boot timeout:
• At the menu, select Set Auto Boot Timeout with the arrow key.
• Three options are available.
• Select the Choose Value option with the arrow key and enter a
value of “0” to disable auto boot.
• Select the Delete option with the arrow key and select the
Delete setting with the arrow key and press <Enter>.
• Choose a time out value of 65535 (0xFFFF) to allow you to
press any key while booting to EFI to disable timeout.
Select Console Output
Device
This feature allows you to select the device that the console output is
sent to.
To select the console output device:
• At the menu, select Manage Boot Next Setting with the arrow
key.
• Select the Option to boot next with the arrow key
• Press <b> to make this option the next boot option.
• Press <r> to reset.
• Select Save to NVRAM.
• Select Exit to return to the Boot Manager.
Select Console Input Device This feature allows you to select the device that the console receives
input from.
To select the console input device:
• At the menu, select Manage Boot Next Setting with the arrow
key.
• Select the Option to boot next with the arrow key.
• Press <b> to make this option the next boot option.
• Press <r> to reset.
• Select Save to NVRAM.
• Select Exit to return to the Boot Manager.
Select Standard Error Device This feature allows you to select the standard error device.
To select the standard error device:
• At the menu, select Manage Boot Next Setting with the arrow
key.
• Select the Option to boot next with the arrow key.
• Press <b> to make this option the next boot option.
• Press <r> to reset.
• Select Save to NVRAM.
• Select Exit to return to the Boot Manager.