100 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration Guide
Table 33 Aruba Configuration > Profiles > IDS > Denial of Service Profile Settings
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can
view basic statistics about device, and define which users have visibility to
which device parameters.
Name Blank Enter the name of the profile.
Referenced Profiles
Rate Thresholds for
Assoc Frames
default Select a profile from the drop-down menu, or click the edit (icon) or add
(icon) to edit or create a profile that sets the rate threshold for association
frames. The IDS rate threshold profile defines thresholds assigned to the
different frame types for rate anomaly checking.
Rate Thresholds for
Disassoc Frames
default Select a profile from the drop-down menu, or click the edit (icon) or add
(icon) to edit or create a profile that sets the rate threshold for
disassociation frames. The IDS rate threshold profile defines thresholds
assigned to the different frame types for rate anomaly checking.
Rate Thresholds for
Deauth Frames
default Select a profile from the drop-down menu, or click the edit (icon) or add
(icon) to edit or create a profile that sets the rate threshold for de-
authentication frames. The IDS rate threshold profile defines thresholds
assigned to the different frame types for rate anomaly checking.
Rate Thresholds for
Probe Request
Frames
default Select a profile from the drop-down menu, or click the edit (icon) or add
(icon) to edit or create a profile that sets the rate threshold for probe
request frames. The IDS rate threshold profile defines thresholds assigned
to the different frame types for rate anomaly checking.
Rate Thresholds for
Probe Response
Frames
default Select a profile from the drop-down menu, or click the edit (icon) or add
(icon) to edit or create a profile that sets the rate threshold for probe
response frames. The IDS rate threshold profile defines thresholds
assigned to the different frame types for rate anomaly checking.
Rate Thresholds for
Auth Frames
default Select a profile from the drop-down menu, or click the edit (icon) or add
(icon) to edit or create a profile that sets the rate threshold for
authentication frames. The IDS rate threshold profile defines thresholds
assigned to the different frame types for rate anomaly checking.
Other Settings
Detect Disconnect
Station Attack
Yes Enables or disables detection of station disconnection attacks.
Disconnect STA
Detection Quiet
Time
900 After a station disconnection attack is detected, sets the time (in seconds)
that must elapse before another identical alarm can be generated.
Spoofed Deauth
Blacklist
No Enables or disables automatic client blacklisting of spoofed de-
authentication.
Detect AP Flood
Attack
No Enables or disables the detection of flooding with fake AP beacons to
confuse legitimate users and to increase the amount of processing need
on client operating systems.
AP Flood Threshold 50 Sets the number of Fake AP beacons that must be received within the
Flood Increase Time to trigger an alarm.
To Next Page
Loading...
