122 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration Guide
Profiles > RF > 802.11a/g Radio > High-Throughput (HT) Radio
Perform these steps to create or edit High Throughput (HT) Radio profiles.
1. Click
Profiles > RF > HT Radio in the Aruba Navigation pane.
2. Click the
Add button to create a new HT Radio profile, or click the pencil icon to edit an existing profile.
The
Details page appears. Complete the settings as described in Table 30:
3. Click
Add or Save. The added or edited HT Radio profile appears on the Profiles > RF > HT Radio page.
Table 45 Aruba Configuration > Profiles > RF > HT Radio Profile Settings
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the profile is associated.
The drop-down menu displays all folders available for association with the
profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can
view basic statistics about device, and define which users have visibility to
which device parameters.
Name Blank Enter the name of the profile.
Other Settings
40MHz
Intolerance
No Allows a radio using this profile to stop using the 40 MHz channels if the 40
MHz intolerance indication is received from another AP or station.
Honor 40MHz
Intolerance
Yes Select 40 MHz intolerance if you want to enable 40 MHz intolerance. This
parameter controls whether or not APs using this high-throughput profile will
advertise intolerance of 40 MHz operation. By default, this option is disabled
and 40 MHz operation is allowed.
Legacy Station
Workaround
No Use this setting to allow or disallow associations from legacy (non-HT)
stations.
To Next Page
Loading...
