66 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration Guide
Profiles Pages and Field Descriptions
Understanding Aruba Configuration Profiles
In ArubaOS, related configuration parameters are grouped into a profile that you can apply as needed to an
AP group or to individual APs. This section lists each category of AP profiles that you can configure and
then apply to an AP group or to an individual AP. Note that some profiles reference other profiles. For
example, a virtual AP profile references SSID and AAA profiles, while an AAA profile can reference an
802.1x authentication profile and server group.
You can apply the following types of profiles to an AP or AP group. See Figure 39. For additional details and
configuration instructions, continue to the related procedures in this section.
Perform the following initial steps to configure profiles.
1. Browse to the
Device Setup > Aruba Configuration page, and click the Profiles heading in the navigation
pane on the left. Figure 38 illustrates general profile categories.
Figure 38 Profiles in the Aruba Configuration Navigation Pane
2. Expand the
Profiles menu by clicking the plus sign (+) next to it. Several profile options appear, as
illustrated in Figure 39.
Figure 39 Profile Navigation Pane of AWMS Aruba Configuration
This document section describes the profiles and settings supported in Aruba Configuration.
To Next Page
Loading...
