46 | Using Aruba Configuration in Daily Operations AirWave Wireless Management Suite | Configuration Guide
z Administrative and Management users in AWMS can view the Device Setup > Aruba Configuration page
and the
APs/Devices > Aruba Config pages.
Administrative users are enabled to view all configurations.
Management users have access to all profiles and Aruba AP groups for their respective folders.
z The Device Setup > Aruba Configuration page has a limit to folder drop-down options for customers that
manage different accounts and different types of users.
z Aruba Configuration entails specific user role and security profiles that define some components of
visibility, as follows:
z Security > User Roles
z Security > Policies
z AWMS continues to support the standard operation of folders, users, and user roles as described in the
AWMS User Guide.
Defining Visibility for Aruba Configuration
Perform these steps to define or adjust visibility for users to manage and support Aruba Configuration:
1. As required, create a new AWMS device folder with management access.
a. Navigate to the
APs/Device > List page, scroll to the bottom of the page. (An alternate page
supporting new folders is
Users > Connected page).
b. Click the
Add New Folder link. The Folder detail page appears, as illustrated in Figure 29:
Figure 29 APs/Devices > Add New Folder > Folders Page Illustration
c. Click
Add. The APs/Devices > List page reappears. You can view your new folder by selecting it from
the
Go to folder drop-down list at the top right of this page. Figure 30 illustrates an unpopulated
device page for an example folder.
Figure 30 APs/Devices > List Page With No Devices
2. Add Aruba controller devices to that folder as required. Use the
Device Setup > Add page following
instructions available in the AWMS User Guide.
To Next Page
Loading...
