Dell PowerConnect W-Airwave Configuration Guide

152 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration Guide
Click Add to complete the configuration of the LDAP Server, or click Save to complete the editing of an
existing server. The new LDAP server appears on the
Security > Server Groups > LDAP Server page. This
server is now available to be used by server groups.
Security > Server Groups > RADIUS
You can configure RADIUS servers for use by a server group. The Security > Server Groups > RADIUS page
displays current RADIUS servers available for inclusion in server groups. Click
Add to create a new
RADIUS server, or click the pencil icon next to an existing RADIUS server to edit the configuration.
The
Security > Server Groups > Add New RADIUS Server page contains the following fields, as described in
Table 64:
Base-DN N/A Enter the distinguished name of the node which contains the
entire user database to use.
Filter (objectclass=*) Select the filter that should be applied to any search of the user in
the LDAP database.
Key Attribute sAMAccountName Enter the attribute that should be used as a key in search for the
LDAP server. For Active Directory, the value is sAMAccountName.
Timeout (1030 sec) 20 Define the timeout period of a LDAP request, in seconds.
Enable Yes Use this field to enable or disable the LDAP server being
configured. You can configure the LDAP server as disabled, but
return later to enable it.
Preferred Connection
Type
ldap-s Select the connection type for the LDAP server from the drop-
down menu. LDAP servers support the following connection
types:
z clear-text—No encryption is used.
z ldap-s—Uses SSL encryption.
z start-tls—Uses TLS encryption.
Table 64 Security > Server Groups > RADIUS
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the server is
associated. The drop-down menu displays all folders available for
association with the server group.
Name Blank Enter the name of the server.
Other Settings
Host IP Address N/A Set the IP address of the authentication server.
Key (Confirm Key) N/A Set the shared secret between the controller and the authentication
server. The maximum length is 48 bytes.
Auth Port 1812 Set the authentication port on the server.
Table 63 Security > Server Groups > Add LDAP Server Field Descriptions (Continued)
Field Default Description

Dell PowerConnect W-Airwave Specifications

General

Brand	Dell
Model	PowerConnect W-Airwave
Category	Software
Language	English