124 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration Guide
3. Click Add or Save. The added or edited profile appears on the Profiles > RF > Event Thresholds page.
Profiles > RF > Optimization
The RF Optimization profile enables or disables load balancing based on a user-defined number of clients or
degree of AP utilization on an AP. Use this profile to detect coverage holes, radio interference and STA
association failures and configure Received signal strength indication (RSSI) metrics.
Perform these steps to create or edit Optimization profiles.
1. Click
Profiles > RF > Optimization in the Aruba Navigation pane. This page summarizes the current
cluster profiles.
2. Click the
Add button to create a new Optimization profile, or click the pencil icon to edit an existing
profile. The
Details page appears. Complete the settings as described in Table 30:
Frame Non
Unicast Rate
High Watermark
0 Sets a high percentage watermark for non-Unicast frame rate. When the
percentage of non-Unicast frames exceeds the configured high watermark, the
system generates an alert. Defining 0% disables this function.
Frame Non
Unicast Rate
Low Watermark
0 Sets a low percentage watermark for non-Unicast frame rate. When the
percentage of non-Unicast frames exceeds the configured low watermark, the
system generates an alert. Defining 0% disables this function.
Frame Receive
Error Rate High
Watermark
50 Sets a high percentage watermark for frame-receive errors. When the percentage
of errors in received frames exceeds the configured high watermark, the system
generates an alert. Defining 0% disables this function.
Frame Receive
Error Rate Low
Watermark
10 Sets a low percentage watermark for frame-receive errors. When the percentage
of errors in received frames exceeds the configured low watermark, the system
generates an alert. Defining 0% disables this function.
Frame Retry
Rate High
Watermark
50 Sets a high percentage watermark for frame retry levels. When the percentage of
frame retries exceeds the configured high watermark, the system generates an
alert. Defining 0% disables this function.
Frame Retry
Rate Low
Watermark
10 Sets a low percentage watermark for frame retry levels. When the percentage of
frame retries exceeds the configured low watermark, the system generates an
alert. Defining 0% disables this function.
Table 47 Aruba Configuration > Profiles > RF > Optimization Profile Settings
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can
view basic statistics about device, and define which users have visibility to
which device parameters.
Name Blank Enter the name of the threshold profile.
Other Settings
AP Load Balancing No Enable or disable AP load balancing based on a user-defined number of
clients or the degree of AP utilization on an AP.
Table 46 Aruba Configuration > Profiles > RF > Event Thresholds Profile Settings (Continued)
Field Default Description
To Next Page
Loading...
