AirWave Wireless Management Suite | Configuration Guide Aruba Configuration Reference | 61
Use the following guidelines when configuring and using WLANs in Aruba Configuration:
z The Device Setup > Aruba Configuration navigation pane displays custom-configured WLANs and Aruba
AP Groups. All other components of the navigation pane are standard across all deployments of Aruba
Configuration.
z You define or modify WLANs on the Device Setup > Aruba Configuration page. Click WLANs from the
navigation pane.
z You can create or edit any profile in an WLAN as you define or modify that WLAN. If you digress to
profile setup from a different page, AWMS returns you to your place on the
WLAN setup page once you
are done with profile setup.
WLANs
The WLANs page displays all configured WLANs in Aruba Configuration and enables you to add or edit
WLANs. For additional information about using this page, refer to “General WLAN Procedures and
Guidelines” on page37. Figure 33 illustrates this page and location.
Figure 37 WLANs Navigation and Page
The
Aruba Configuration > WLANs page contains additional information as described in Table 7:
Table 7 Aruba Configuration > WLANs Page Field Descriptions
Field Description
Name Lists the name of the WLAN.
SSID Lists the SSID currently defined for the WLAN.
Aruba AP Group Lists the Aruba AP Group or Groups that use the associated WLAN.
AP Override Lists any AP Override configurations for specific APs on the WLAN and in the respective
Aruba AP Groups.
Traffic Management Lists Traffic Management profiles that are currently configured and deployed on the
WLAN.
Folder Lists the folder for the WLAN.
To Next Page
Loading...
