Dell PowerConnect W-Airwave - Changing Adaptive Radio Management (ARM) Settings

42 | Using Aruba Configuration in Daily Operations AirWave Wireless Management Suite | Configuration Guide
Figure 27 AP Overrides Add or Edit Page Illustration (Non-scrolling View)
For a description of all fields on this page, refer to Table 5 in the Appendix.
3. Click
Add or Save. The added or edited AP Override appears on the AP Overrides page.
4. Push the newly added or edited AP Override configuration to the desired Aruba Controllers. Refer to
“Pushing Device Configurations to Controllers” on page40.
5. Repeat this procedure or continue to additional procedures to complete WLAN, Profile, Aruba AP Group
or other configurations.
Changing Adaptive Radio Management (ARM) Settings
You can adjust ARM settings for the radios of a particular Aruba AP Group. To do so, refer to the following
topics that describe ARM in relation to Aruba AP groups and device-level radio settings:
z “Configuring Aruba AP Groups” on page34
z “Aruba AP Groups” on page53
z “Profiles > RF > 802.11a/g Radio > ARM” on page124