AirWave Wireless Management Suite | Configuration Guide Aruba Configuration Reference | 151
Click Add to complete the configuration of the Server Group, or click Save to complete the editing of an
existing server. The new server group appears on the
Security > Server Groups page.
Security > Server Groups > LDAP
You can configure Lightweight Directory Access Protocol (LDAP) servers for use by a server group.
The
Security > Server Groups > LDAP page displays current LDAP servers available for inclusion in server
groups. Click
Add to create a new LDAP server, or click the pencil icon next to an existing LDAP server to
edit the configuration.
The
Security > Server Groups > Add LDAP Server page contains the following fields, as described in Table 63:
Server Group Rule
Field to set role Specify whether the server group rule is a role or a VLAN. The Role/VLAN
field at the bottom of the page changes in response to your selection here.
Attribute ARAP-
Features
From the drop-down menu, click the attribute that defines the server group
rule being configured. Many options are supported.
Operation contains Select the criteria by which to process the Operand, which you specify in the
following field.
Operand N/A Enter a text string.
Role/VLAN ap-role Select the role or VLAN to associate with this new server group rule from the
drop-down menu.
Table 63 Security > Server Groups > Add LDAP Server Field Descriptions
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the server is
associated. The drop-down menu displays all folders available for
association with the server group.
Name Blank Enter the name of the server.
Other Settings
Host IP Address 0.0.0.0 Enter the IP address of the LDAP server.
Admin-DN N/A Enter the distinguished name for the admin user who has read/
search privileges across all the entries in the LDAP database. The
user need not have write privileges but the user should be able to
search the database, and read attributes of other users in the
database.
Admin Password N/A Enter the password for the admin user.
Allow Clear-text No Enable this setting to allows clear-text (unencrypted)
communication with the LDAP server.
Auth Port 389 Enter the port number used for authentication on the LDAP
server.
Table 62 Security > Server Groups > Add or Edit Server Group Field Descriptions (Continued)
Field Default Description
To Next Page
Loading...
