38 | Using Aruba Configuration in Daily Operations AirWave Wireless Management Suite | Configuration Guide
Figure 24 Device Setup > WLANs > Add > Basic Page Illustration
3. Click
Add or Save. The added or edited WLAN appears on the WLANs page. You can now use this WLAN
with one or more Aruba AP Groups.
4. Repeat this procedure or continue to additional procedures to complete WLAN, Profile, Aruba AP Group
or other configurations.
5. Push the newly added or edited WLAN to the desired Aruba Controllers. Refer to “Pushing Device
Configurations to Controllers” on page40.
Configuring or Editing WLANs with Advanced View
1. Navigate to the Aruba Configuration > WLANs page. This page displays currently configured WLANs.
Figure 23 illustrates this page.
2. To add a new WLAN, click the
Add WLAN button. To edit an existing WLAN, click the pencil icon next to
the WLAN name. Select
Advanced to define or modify the settings that pertain to advanced WLAN
configuration. Figure 25 illustrates the
Advanced view. For complete description of all fields on this
page, refer to Table 9 in the Appendix.
To Next Page
Loading...
