Dell PowerConnect W-Airwave - Profiles RF Event Thresholds

AirWave Wireless Management Suite | Configuration Guide Aruba Configuration Reference | 123
Profiles > RF > Event Thresholds
Perform these steps to create or edit Event Threshold profiles.
1. Click
Profiles > RF > Event Thresholds in the Aruba Navigation pane.
2. Click the
Add button to create a new Event Thresholds profile, or click the pencil icon to edit an existing
profile. The
Details page appears. Complete the settings as described in Table 30:
Table 46 Aruba Configuration > Profiles > RF > Event Thresholds Profile Settings
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the profile is associated.
The drop-down menu displays all folders available for association with the profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can view
basic statistics about device, and define which users have visibility to which
device parameters.
Name Blank Enter the name of the thresholds profile.
Other Settings
Detect Frame
Rate Anomalies
No Enables or disables alerts for frame rate anomalies.
Bandwidth Rate
High Watermark
0 Sets a high percentage watermark for bandwidth rate. When exceeded, this
threshold triggers a high-watermark-exceeded alert. Defining 0% disables this
function.
Bandwidth Rate
Low Watermark
0 Sets a low percentage watermark for bandwidth rate. When exceeded, this
threshold triggers a low-watermark-exceeded alert. Defining 0% disables this
function.
Frame Error
Rate High
Watermark
50 Sets a high percentage watermark for frame error rates. When frame error rates
exceed this threshold, this setting triggers a high-watermark-exceeded alert.
Defining 0% disables this function.
Frame Error
Rate Low
Watermark
10 Sets a low percentage watermark for frame error rates. When frame error rates
exceed this threshold, this setting triggers a low-watermark-exceeded alert.
Defining 0% disables this function.
Frame
Fragmentation
Rate High
Watermark
0 Sets a high percentage watermark for frame fragmentation rates. When frame
fragmentation rates exceed this threshold, this setting triggers a high-watermark-
exceeded alert. Defining 0% disables this function.
Frame
Fragmentation
Rate Low
Watermark
0 Sets a low percentage watermark for frame fragmentation rates. When frame
fragmentation rates exceed this threshold, this setting triggers a low-watermark-
exceeded alert. Defining 0% disables this function.
Frame Low
Speed Rate High
Watermark
0 Sets a high percentage watermark for low speed rates. When the percentage of
received and transmitted frames at low speed (less that 5.5Mbps for 802.11b and
less than 24 Mbps for 802.11a) exceeds the configured high watermark, the
system generates an alert. Defining 0% disables this function.
Frame Low
Speed Rate Low
Watermark
0 Sets a low percentage watermark for low speed rates. When the percentage of
received and transmitted frames at low speed (less that 5.5Mbps for 802.11b and
less than 24 Mbps for 802.11a) exceeds the configured Low Watermark, the
system generates an alert. Defining 0% disables this function.