90 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration Guide
Profiles > AP > AP Ethernet Link
The configurable speed defined in this profile is dependent on the port type, and you can define a separate
Ethernet Interface profile for each Ethernet link.
Perform these steps to configure a
Ethernet Link profile.
1. Click
Profiles > AP > Ethernet Link in the Aruba Navigation pane.
2. Click the
Add button to create a new System profile, or click the pencil icon next to an existing profile to
edit that profile. The
Details page appears. Complete the settings as described in Table 23:
3. Click
Add or Save. The added or edited Ethernet Link profile appears on the AAA Profiles page, and on
the
802.1x Auth details page.
Profiles > AP > SNMP
Aruba controllers and APs support versions 1, 2c, and 3 of Simple Network Management Protocol (SNMP)
for reporting purposes only. In other words, SNMP cannot be used for setting values in an Aruba system in
the current ArubaOS version. Perform these steps to configure a
SNMP profile.
1. Click
Profiles > AP > SNMP in the Aruba Navigation pane.
2. Click the
Add button to create a new SNMP profile, or click the pencil icon next to an existing profile to
edit that profile. The
Details page appears. Complete the settings as described in Table 24:
Table 23 Aruba Configuration > Profiles > AP > Ethernet Link Profile Settings
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can
view basic statistics about device, and define which users have visibility to
which device parameters.
Name Blank Enter the name of the profile.
Other Settings
Speed (Mbps) auto Designates the speed of the Ethernet link for this profile. Options are 10, 100,
or 1000 Mbits.
Duplex auto Defines this profile to support duplex Ethernet. Options are full, half, or auto.
Table 24 Aruba Configuration > Profiles > AP > SNMP Profile Settings
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can
view basic statistics about device, and define which users have visibility to
which device parameters.
Name Blank Enter the name of the profile.
To Next Page
Loading...
Need help?
General
