AirWave Wireless Management Suite | Configuration Guide Aruba Configuration Reference | 147
Click Add to complete the configuration of the Policies profile. The new policy appears on the Security >
Policies > Policies
page.
Security > Policies > Destinations
The Security > Policies > Destinations page lists the destination names currently configured, with the Policy
that uses the destination and the folder. To create a new destination to be referenced by a security policy,
click the
Add New Net Destination button. To edit an existing policy, click the pencil icon.
The
Security > Policies > Add New Destinations page contains the following fields, as described in Table 60:
Click
Add to complete the configuration of the Destination policy profile, or click Save to complete the
editing of an existing server. The new destination appears on the
Security > Policies > Destinations page.
Name Blank Enter the name of the policy.
Other Settings
Policy Type IPv4 Session Specify the type of policy. The options are as follows:
z IPv4
z IPv6
Table 60 Security > Policies > Net Destinations Field Descriptions
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the security
policy is associated. The drop-down menu displays all folders
available for association with the policy.
Name Blank Enter the name of the destination.
Other Settings
Invert No Use this field to invert the destination from one end of the VPN
connection to the other.
Add New Net
Destination Rule
N/A Click this button to create a new rule for this destination profile.
Clicking this button displays the Net Destination Rule section,
which is comprised of two settings:
z Rule Type—Specify whether the rule applies to Host,
Network, or Range.
z IP Address—Enter the IP address for the net destination rule.
Table 59 Security > Policy > Add New Policy Field Descriptions (Continued)
Field Description
To Next Page
Loading...
