142 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration Guide
The Security > User Roles > Add New User Role page contains the following fields, as described in Table 56:
Folder Displays the folder that is associated with this User Role. A Top viewable folder for the
role is able to view all devices and groups contained by the top folder. The top folder and
its subfolders must contain all of the devices in any of the groups it can view.
Clicking any folder name takes you to the APs/Devices > List page for folder inventory
and configuration.
Table 56 Security > User Roles > Add New User Role Field Descriptions
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the User Role is
associated. The drop-down menu displays all folders available for
association with the profile.
Name Blank Enter the name of the user role.
Other Settings
Captive Portal Auth (Optional) Select the Captive Portal Auth profile, if any, that is to be
referenced by the user role. For additional information, refer to “Profiles >
AAA > Captive Portal Auth” on page69. Click the add icon to create a new
profile, or click the pencil icon to edit an existing profile.
Downstream
Bandwidth Contract
None (Optional) You can assign a bandwidth contract to provide an upper limit to
upstream or downstream bandwidth utilized by clients in this role. You can
select the Per User option to apply the bandwidth contracts on a per-user
basis instead of to all clients in the role.
For additional information, refer to “Security > User Roles > BW Contracts”
on page143.
Downstream Contract
Applies Per User
No If you selected a DS BW contract in the prior field, this gray field becomes
active. Select Yes or No.
Upstream Bandwidth
Contract
None (Optional) You can assign a bandwidth contract to provide an upper limit to
upstream or downstream bandwidth utilized by clients in this role. You can
select the Per User option to apply the bandwidth contracts on a per-user
basis instead of to all clients in the role.
For additional information, refer to “Security > User Roles > BW Contracts”
on page143.
Upstream Contract
Applies Per User
No If you selected an US BW contract in the prior field, this gray field becomes
active. Select Yes or No.
Maximum Number of
Datapath Sessions
Allowed
None Use this field to configure a maximum number of sessions per user in this
role. You can configure any value between 0-65535.
Reauthentication
Interval Time
0 (Optional) Set the time, in minutes, after which the client is required to re-
authenticate. Enter a value between 0-4096. 0 disables reauthentication.
ID of VLAN To Be
Assigned
Blank (Optional) By default, a client is assigned a VLAN on the basis of the
ingress VLAN for the client to the controller. Use this field to override this
assignment and configure the VLAN ID that is to be assigned to the user
role.
Table 55 Security > User Roles Page Contents (Continued)
Column Description
To Next Page
Loading...
