82 | Aruba Configuration Reference AirWave Wireless Management Suite | Configuration Guide
3. Click Add or Save. The added or edited profile appears on the Stateful NTLM Auth page, and on the
details page.
Table 19 Aruba Configuration > Profiles > AAA > WISPr Auth Profile Settings
Field Default Description
General Settings
Folder Top Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can
view basic statistics about device, and define which users have visibility to
which device parameters.
Name Blank Enter the name of the profile.
Other Settings
Server Group default Select the AAA authentication server group. Click the pencil icon to edit an
existing server group or click the add icon to create a new server group.
Default Role guest Select the default role assigned to users that complete WISPr
authentication.
Logon Wait
Minimum Wait
5 Define the minimum wait time for additional logon attempts. If the
controller’s CPU utilization has surpassed the Logon Wait CPU utilization
threshold value, this wait parameter defines the minimum number of
seconds a user will have to wait prior to retrying a login attempt. The
supported range is 1 to 10 seconds.
Logon Wait
Maximum Wait
10 Define the maximum wait time for additional logon attempts. If the
controller’s CPU utilization has surpassed the Login wait CPU utilization
threshold value, this wait parameter defines the maximum number of
seconds a user will have to wait prior to retrying a login attempt. The
supported range is form 1 to 10 seconds.
Logon Wait CPU
Utilization
Threshold
60 Set the percentage of CPU utilization at which the maximum and minimum
logon wait times are enforced. The supported range is from 1% to 100%.
WISPr Location-ID
ISO Country Code
N/A Enter the ISO Country Code section of the WISPr Location ID.
WISPr Location-ID
E.164 Area Code
N/A Enter the E.164 Area Code section of the WISPr Location ID.
WISPr Location-ID
SSID/zone
N/A Enter the SSID/Zone section of the WISPr Location ID.
WISPr Operator
Name
N/A Enter a name identifying the hotspot operator.
WISPr Location
Name
N/A Enter a name identifying the hotspot location. If no name is defined, the
parameter will use the name of the AP to which the user has associated.
To Next Page
Loading...
