FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-4
1-3. LASER SAFETY LABEL
• A laser safety labels is attached to the outside of the machine as shown below.
1-4. LASER CAUTION LABEL
• A laser caution label is attached to the inside of the machine as shown below.
1-5. PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
• When laser protective goggles are to be used, select ones with a lens conforming to the
above specifications.
• When a disassembly job needs to be performed in the laser beam path, such as when
working around the printerhead and PC Drum, be sure first to turn the copier OFF.
• If the job requires that the copier be left ON, take off your watch and ring and wear laser
protective goggles.
• A highly reflective tool can be dangerous if it is brought into the laser beam path. Use
utmost care when handling tools on the user’s premises.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
PRODUCT
Laser safety label
4022D501AA
4022D027AA
To Next Page
Loading...
