Develop D 1531iD - Application of Toner

FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-34
<Cleaning of the Pre-Image Transfer Guide Plate>
(3) Application of Toner
NOTE
• Perform these steps when the PC Drum and/or Cleaning Blade have been replaced.
18. Pour one packet of developer.
NOTE
• Shake the packet of developer well before pouring.
• When the developer has been replaced, run
“ATDC Sensor Automatic Adjustment.”
☞ D-61