Interfaces Bridging
Digi Connect IT® 4 User Guide
197
Bridging
Bridging is a mechanism to create a single network consisting of multiple devices, such as Ethernet
devices and wireless access points. You can also use bridging to create a Vitural LAN switchport
bridge. See Create a VLAN using switchport mode for more information about switchport bridging for
VLANs.
By default, the Connect IT 4 has the following preconfigured bridges:
You can modify configuration settings for the existing bridge, and you can create new bridges.
This section contains the following topics:
Edit the preconfigured LAN bridge 198
Configure a bridge 201
To Next Page
Loading...
