Digi Connect IT 4 User Manual

Applications Set up the Connect IT 4 to automatically run your applications
Digi Connect IT® 4 User Guide
629
Set up the Connect IT 4 to automatically run your applications
This section contains the following topics:
n Configure scripts to run automatically
n Show script information
n Stop a script that is currently running
Configure scripts to run automatically
You can configure a script or a python application to run automatically when the system restarts, at
specific intervals, or at a specified time. By default, scripts execute in a "sandbox," which restricts
access to the file system and available commands that can be used by the script.
Required configuration items
n Upload or create the script. The script must be uploaded to /etc/config/scripts or a
subdirectory.
n Enable the script.
n Select whether the script should run:
l When the device boots.
l At a specified time.
l At a specified interval.
l During system maintenance.
Additional configuration items
n If the script is a Python application, include the full path to the script.
n A label used to identify the script .
n The action to take if the script finishes. The actions that can be taken are:
l None.
l Restart the script.
l Reboot the device.
n Whether to write the script output and errors to the system log.
n If the script is set to run at a specified interval, whether another instance of the script should
be run at the specified interval if the previous instance is still running.
n The memory available to be used by the script .
n Whether the script should run one time only.
Task one: Upload the application
Web

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English