Digi Connect IT 4 User Manual

System administration Reboot your Connect IT 4 device
Digi Connect IT® 4 User Guide
775
Note You may want to save your configuration settings to a file before rebooting. See Save
configuration to a file.
Reboot your device immediately
Web
1. Log into the Connect IT 4 WebUI as a user with Admin access.
2. From the main menu, click System.
3. Click Reboot.
4. Click Reboot to confirm that you want to reboot the device.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> reboot
Schedule reboots of your device
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English