Services Configure a multicast route
Digi Connect IT® 4 User Guide
567
-----------------
Status : Up
Sync Status : Up
Remote Refid ST T When Poll Reach Delay Offset
Jitter
---------------- ------------- -- - ---- ---- ----- ------ ------
------
*ec2-52-2-40-158 129.6.15.32 2 u 191 1024 377 33.570 +1.561
0.991
128.136.167.120 128.227.205.3 3 u 153 1024 1 43.583 -1.895
0.382
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure a multicast route
Multicast routing allows a device to transmit data to a single multicast address, which is then
distributed to a group of devices that are configured to be members of that group.
To configure a multicast route:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Multicast.
To Next Page
Loading...
Need help?
General
