Digi Connect IT 4

Command line interface Command line reference
Digi Connect IT® 4 User Guide
954
Parameters
interface: Display more details and config data for a specific network interface.
all: Display all interfaces including disabled interfaces.
verbose: Display more information (less concise, more detail).
show ntp
Show NTP status & statistics.
Syntax
show ntp
Parameters
None
show openvpn client
Show OpenVPN client status & statistics.
Syntax
show openvpn client [name STRING] [all]
Parameters
name: Display more details and config data for a specific OpenVPN client.
all: Display all clients including disabled clients.
show openvpn server
Show OpenVPN server status & statistics.
Syntax
show openvpn server [name STRING] [all]
Parameters
name: Display more details and config data for a specific OpenVPN server.
all: Display all servers including disabled servers.
show route
Show IP routing information.
Syntax
show route [ipv4] [ipv6] [verbose]
Parameters
ipv4: Display IPv4 routes.
ipv6: Display IPv6 routes.