Digi Connect IT 4

Command line interface Command line reference
Digi Connect IT® 4 User Guide
959
system duplicate-firmware
Duplicate the running firmware to the alternate partition so that the device will always boot the same
firmware version.
Syntax
system duplicate-firmware
Parameters
None
system factory-erase
Erase the device to restore to factory defaults. All configuration and automatically generated keys will
be erased.
Syntax
system factory-erase
Parameters
None
system find-me
Find Me function to flash LEDs on this device to help users locate the unit.
Syntax
system find-me <state>
Parameters
state: Find Me control to flash cellular-related LEDs.
system firmware ota check
Query the Digi firmware server for the latest device firmware version.
Syntax
system firmware ota check
Parameters
None
system firmware ota list
Query the Digi firmware server for a list of device firmware versions.