Virtual Private Networks (VPN) IPsec
Digi Connect IT® 4 User Guide
358
Configure a Simple Certificate Enrollment Protocol client
Simple Certificate Enrollment Protocol (SCEP) is a mechanism that allows for large-scale X.509
certificate deployment. You can configure Connect IT 4 device to function as a SCEP client that will
connect to a SCEP server that is used to sign Certificate Signing Requests (CSRs), provide Certificate
Revocation Lists (CRLs), and distribute valid certificates from a Certificate Authority (CA).
Required configuration
n Enable the SCEP client.
n The fully-qualified domain name of the SCEP server to be used for certificate requests.
n The challenge password provided by the SCEP server that the SCEP client will use when
making SCEP requests.
n The distinguished name to be used for the CSR.
Additional configuration
n The number of days that the certificate enrollment can be renewed, prior to the request
expiring.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > SCEP Client.
4. For Add clients, enter a name for the SCEP client and click .
To Next Page
Loading...
Need help?
General
