Digi Connect IT 4

Routing Dynamic DNS
Digi Connect IT® 4 User Guide
279
4. Set the interface for the Dynamic DNS instance:
a. Use the ? to determine available interfaces:
(config network ddns new_ddns_instance)> interface ?
Interface: The network interface from which to obtain the IP address to
register with the dynamic DNS service.
Format:
defaultip
defaultlinklocal
eth1
eth2
loopback
Current value:
(config network ddns new_ddns_instance)> interface
b. Set the interface. For example:
(config network ddns new_ddns_instance)> interface wan
(config network ddns new_ddns_instance)>
5. Set the Dynamic DNS provider service:
a. Use the ? to determine available services:
(config network ddns new_ddns_instance)> service ?
Service: The provider of the dynamic DNS service.
Format:
custom
3322.org
changeip.com
ddns.com.br
dnsdynamic.org
...
Default value: custom
Current value: custom
(config network ddns new_ddns_instance)> service
b. Set the service:
(config network ddns new_ddns_instance)> service service_name
(config network ddns new_ddns_instance)>
6. If custom is configured for service, set the custom URL that should be used to update the IP
address with the Dynamic DNS provider:
(config network ddns new_ddns_instance)> custom url
(config network ddns new_ddns_instance)>