Digi Connect IT 4

Virtual Private Networks (VPN) IPsec
Digi Connect IT® 4 User Guide
329
i. Move back one level in the schema:
(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)>
..
(config vpn ipsec tunnel ipsec_example ike phase1_proposal)>
ii. Add an additional proposal:
(config vpn ipsec tunnel ipsec_example ike phase1_proposal)> add
end
(config vpn ipsec tunnel ipsec_example ike phase1_proposal 1)>
Repeat the above steps to set the type of encryption, hash, and Diffie-Hellman
group for the additional proposal.
iii. Repeat to add more phase 1 proposals.
j. Configure the types of encryption, hash, and Diffie-Hellman group to use during phase 2:
i. Move back two levels in the schema:
(config vpn ipsec tunnel ipsec_example ike phase1_proposal 0)> .. ..
(config vpn ipsec tunnel ipsec_example ike)>
ii. Add a phase 2 proposal:
(config vpn ipsec tunnel ipsec_example ike)> add ike phase2_proposal
end
(config vpn ipsec tunnel ipsec_example ike phase2_proposal 0)>
iii. Set the type of encryption to use during phase 2:
(config vpn ipsec tunnel ipsec_example ike phase2_proposal 0)>
cipher value
(config vpn ipsec tunnel ipsec_example ike phase2_proposal 0)>
where value is one of:
n 3des
n aes128
n aes128gcm128
n aes128gcm64
n aes128gcm96
n aes192
n aes192gcm128
n aes192gcm64
n aes192gcm96
n aes256
n aes256gcm128
n aes256gcm64
n aes256gcm96
n null