Revision Date Description
l Added support for sending an HTTP or TCP stream of results
from the Wi-Fi scanner to one or more remote servers.
n SCEP enhancements:
l New SCEP client settings and underlying functionality to
support connecting to additional SCEP servers.
l Added show scep Admin CLI command to show the sync
status, expiration dates, and additional details of any
configured SCEP clients.
n VPN enhancements:
l Include the hostname of the device in the client .ovpn file
listed on the Status → OpenVPN → Servers page in the web
UI.
n Location services enhancements:
l New settings to control the NMEA message content that the
devices sends when there is no valid fix from any of the
configured location sources.
Additional changes
n Documented new Connect IT features: Configure Connect IT
features
n Updated the CORE module insertion steps.
S April 2022
Updated ERASEbutton information. See Erase device configuration and
reset to factory defaults.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2023 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Digi Connect IT® 4 User Guide
5
To Next Page
Loading...
Need help?
General
