Digi Connect IT 4 User Manual

Applications Develop Python applications
Digi Connect IT® 4 User Guide
606
i. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
iii. Click System > Scheduled tasks >Custom scripts.
iv. Click  to add a custom script.
v. For Label, type Show system application.
vi. For Run mode, select On boot.
vii. For Exit action, select Restart script.
viii. For Commands, type python /etc/config/scripts/showsystem.py.
ix. Click Apply to save the configuration and apply the change.
Command line
i. Select the device in Remote Manager and click Actions > Open Console, or log into
the Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
ii. At the command line, type config to enter configuration mode:
> config
(config)>

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English