Digi Connect IT 4 User Manual

User authentication Local users
Digi Connect IT® 4 User Guide
670
n The amount of time that the user is locked out of the system after the specified number of
unsuccessful login attempts.
n An optional public ssh key, to authenticate the user when using passwordless SSH login.
n Two-factor authentication information for user login over SSH, telnet, and the serial console:
l The verification type for two-factor authentication: Either time-based or counter-based.
l The security key.
l Whether to allow passcode reuse (time based verification only).
l The passcode refresh interval (time based verification only).
l The valid code window size.
l The login limit.
l The login limit period.
l One-time use eight-digit emergency scratch codes.
To configure a local user:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English