Digi Connect IT 4

System administration Configuration files
Digi Connect IT® 4 User Guide
789
the Connect IT 4 device.
n local-path is the location on the Connect IT 4 device where the copied file will be placed.
For example:
> scp host 192.168.4.1 user admin remote /home/admin/bin/backup-archive-
0040FF800120-23.3.31.129-19.23.42.bin local /opt to local
3. Enter the following:
> system restore filepath [passphrase passphrase]
where
n filepath is the the path and filename of the configuration backup file on the Connect IT
4's filesystem (local-path in the previous step).
n passphrase (optional) is the passphrase to restore the configuration backup, if a
passphrase was used when the backup was created.
For example:
> system restore /opt/backup-archive-0040FF800120-23.3.31.129-
19.23.42.bin