Digi Connect IT 4

Monitoring intelliFlow
Digi Connect IT® 4 User Guide
811
6. Add another port:
(config monitoring intelliflow groups 1)> add .. end
(config monitoring intelliflow groups 2)>
7. Set the port number:
(config monitoring intelliflow groups 2)> domain devicecloud.com
(config monitoring intelliflow groups 2)>
8. Set the service type:
(config monitoring intelliflow groups 2)> group Digi
(config monitoring intelliflow groups 2)>
9. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.