Draytek Vigor2860 - Page 878

Vigor2860 Series User’s Guide
864
voip sip acc n [-<command> <parameter> | ... ]
voip sip calllog
voip sip ep n [-<command> <parameter> | ... ]
voip sip misc[-<command> <parameter> | ... ]
voip sip nat [-<command> <parameter> | ... ]
S
S
y
y
n
n
t
t
a
a
x
x
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
Parameter Description
voip sip acc - Allows users to set SIP account.
n n = 1 to 12
It means the index number of the VoIP settings.
-P [profile] It means the name of the account profile (maximum 11 characters).
-r [reg mode] Set registration mode for SIP account.
0 – none
1 – auto
2 - wan1 only
3 - wan2 only
4 - lan/vpn
5 – PVC
6 - wan3 only
7 - wan4 only
8 - wan1 first
9 - wan2 first
10 - wan3 first
11 - wan4 first
-o [port] Set the port number for sending/receiving SIP message for building
a session. The default value is 5060.
-d [domain] Set the domain name or IP address of the SIP Registrar server. The
maximum is 63 characters.
-y [proxy] Set domain name or IP address of SIP proxy server. The maximum is
63 characters.
-b [enable] Enable / disable outbound proxy by SIP account.
0 – disable
1 - enable
-s [enable] Enable / disable to locate SIP server (rfc 3263).
0 – disable
1 - enable
-N [name] Set SIP account display name.
Name - max. 23 characters.
-n [number] Set SIP account number.
Number - max. 63 characters.
-a [id] Set SIP authentication ID.
Id - max. 63 characters.
-A [enable] Enable /disable to use SIP authentication ID.
0 – disable
1 - enable
-p [passwd] Set SIP account password (max. 63 characters).
-e [sec] Set expiry time (default 3600) for SIP account.
-w [enable] Enable to make phone call without registering.
-m [mode] Set NAT traversal mode.