To Next Page
B
barberdominiqueAug 29, 2025
What to do if DURKOPP ADLER Sewing Machine shows internal EEprom defective?
- EEdward LeeAug 30, 2025
If the internal EEPROM is defective in your DURKOPP ADLER Sewing Machine, replace the control.
What to do if DURKOPP ADLER Sewing Machine shows internal EEprom defective?
If the internal EEPROM is defective in your DURKOPP ADLER Sewing Machine, replace the control.
What to do if maximum speed exceeded on DURKOPP ADLER 867 Sewing Machine?
If the maximum speed is exceeded on your DURKOPP ADLER Sewing Machine, replace the encoder, perform a reset, and check the class (t 51 04).
What to do if DURKOPP ADLER Sewing Machine shows no valid data on external EEprom?
If your DURKOPP ADLER Sewing Machine indicates no valid data on the external EEPROM because the internal data structures are incompatible, perform a software update.
What to do if DA stepper card 1 boot error on DURKOPP ADLER 867 Sewing Machine?
If you encounter a DA stepper card 1 boot error on your DURKOPP ADLER Sewing Machine, check the connection cables. You may also try a software update or replace the DACextension box.
How to fix checksum error during update on DURKOPP ADLER Sewing Machine?
If you encounter a checksum error during update on your DURKOPP ADLER Sewing Machine, check the connection cables. You may also try a software update or replace the DACextension box.
What to do if no external EEprom connected on DURKOPP ADLER 867?
If no external EEprom is connected to your DURKOPP ADLER Sewing Machine, connect the machine ID.
Why is the thread breaking on my DURKOPP ADLER Sewing Machine?
If the thread is breaking on your DURKOPP ADLER Sewing Machine, several factors could be at play. Ensure the needle and hook threads are correctly threaded. A bent or sharp-edged needle should be replaced. Make sure the needle is properly inserted into the needle bar and that you're using the recommended thread. Also, check the thread tensions, as they might be too tight for the thread being used. Inspect thread-guiding parts for any sharp edges and have damaged throat plates, hooks, or spreaders reworked by qualified specialists.
What to do if DURKOPP ADLER Sewing Machine shows no valid data on internal and external EEprom?
If your DURKOPP ADLER Sewing Machine shows no valid data on the internal and external EEPROM, indicating a software version incompatibility, check the machine ID connection. Then, switch off the control, wait until the LEDs are off, and switch the control on again. If the issue remains, perform a software update.
What to do if DURKOPP ADLER Sewing Machine shows communication error?
If you're experiencing a communication error on your DAC classic DURKOPP ADLER Sewing Machine, where only the functions of the DAC basic are available, try restarting the control. If the problem continues, attempt a software update. If neither works, consider replacing the control.
What to do if DURKOPP ADLER Sewing Machine shows checksum error during update?
If you encounter a checksum error during an update on your DURKOPP ADLER Sewing Machine, first check the connection cables. If the problem persists, attempt a software update. If the issue still occurs, consider replacing the DACextension box.
General| Stitch Type | Lockstitch |
|---|---|
| Max Stitch Length | 12 mm |
| Needle System | 134-35 |
| Needle Thread Tension | Adjustable |
| Lubrication | Automatic |
| Type | Industrial Sewing Machine |
| Max Sewing Speed | 3000 stitches per minute |
| Presser Foot Lift | 20 mm |
| Power Requirements | 230V/50Hz |
