DURKOPP ADLER 867 Service Manual (English)

Other manuals for DURKOPP ADLER 867

Service Instructions164 pages

Durkopp Adler192 pages

Parts List153 pages

Instruction Manual70 pages

Additional Instructions20 pages

Instructions16 pages

Questions and Answers:

K
Kyle VillarrealSep 14, 2025
Why is the thread breaking on my DURKOPP ADLER Sewing Machine?
- D
  danielscottSep 14, 2025
  If the thread is breaking on your DURKOPP ADLER Sewing Machine, several factors could be at play. Ensure the needle and hook threads are correctly threaded. A bent or sharp-edged needle should be replaced. Make sure the needle is properly inserted into the needle bar and that you're using the recommended thread. Also, check the thread tensions, as they might be too tight for the thread being used. Inspect thread-guiding parts for any sharp edges and have damaged throat plates, hooks, or spreaders reworked by qualified specialists.
A
Alexa CastanedaSep 14, 2025
Why is my DURKOPP ADLER Sewing Machine skipping stitches?
- N
  Nicholas KingSep 15, 2025
  If your DURKOPP ADLER Sewing Machine is skipping stitches, verify that the needle thread and hook thread are correctly threaded. Replace the needle if it's blunt or bent, and ensure it's correctly inserted into the needle bar. Use the recommended needle thickness for your fabric. Check the assembly of the reel stand and make sure thread tensions are not too tight. If the throat plate, hook, or spreader are damaged, have them reworked by qualified specialists.
B
barberdominiqueAug 29, 2025
What to do if DURKOPP ADLER Sewing Machine shows internal EEprom defective?
- E
  Edward LeeAug 30, 2025
  If the internal EEPROM is defective in your DURKOPP ADLER Sewing Machine, replace the control.
J
Jennifer DelgadoAug 25, 2025
What to do if DURKOPP ADLER Sewing Machine shows software update error?
- A
  Amanda PachecoAug 25, 2025
  If you encounter a software update error on your DAC classic DURKOPP ADLER Sewing Machine, where only the functions of the DAC basic remain available, attempt another software update. If the issue persists, consider replacing the control.
E
Eugene GomezAug 25, 2025
What to do if DURKOPP ADLER Sewing Machine shows checksum error during update?
- M
  Ms. Kim Miller DVMAug 26, 2025
  If you encounter a checksum error during an update on your DURKOPP ADLER Sewing Machine, first check the connection cables. If the problem persists, attempt a software update. If the issue still occurs, consider replacing the DACextension box.
C
Christopher WangAug 26, 2025
What to do if DURKOPP ADLER Sewing Machine shows communication error?
- M
  maymarkAug 26, 2025
  If you're experiencing a communication error on your DAC classic DURKOPP ADLER Sewing Machine, where only the functions of the DAC basic are available, try restarting the control. If the problem continues, attempt a software update. If neither works, consider replacing the control.
J
Joy RiveraAug 26, 2025
What to do if DURKOPP ADLER Sewing Machine shows no valid data on internal and external EEprom?
- T
  tcarterAug 26, 2025
  If your DURKOPP ADLER Sewing Machine shows no valid data on the internal and external EEPROM, indicating a software version incompatibility, check the machine ID connection. Then, switch off the control, wait until the LEDs are off, and switch the control on again. If the issue remains, perform a software update.
A
Adam WallsAug 27, 2025
What to do if DURKOPP ADLER Sewing Machine shows no valid data on internal EEprom and no external EEprom connected?
- V
  Vanessa MitchellAug 27, 2025
  If your DURKOPP ADLER Sewing Machine displays no valid data on the internal EEPROM and no external EEPROM is connected, indicating that the internal data structures are not compatible, check the machine ID connection. Then, switch off the control, wait until the LEDs are off, and switch the control on again. If the problem persists, perform a software update.
D
Dr. Kimberly HardyAug 27, 2025
What to do if DURKOPP ADLER Sewing Machine shows no valid data on internal EEprom?
- D
  Dorothy NguyenAug 27, 2025
  If your DURKOPP ADLER Sewing Machine shows no valid data on the internal EEPROM, indicating that internal data structures are not compatible, check the machine ID connection. Then, switch off the control, wait until the LEDs are off, and switch the control on again. If the issue persists, perform a software update.
A
alvarezkatieAug 27, 2025
What to do if DURKOPP ADLER Sewing Machine shows software version error?
- T
  Teresa JuarezAug 27, 2025
  If you encounter a software version error on your DAC classic DURKOPP ADLER Sewing Machine, where only the functions of the DAC basic remain available, try a software update. If the issue persists, consider replacing the control.

DURKOPP ADLER 867 Specifications

General

Stitch Type	Lockstitch
Max Stitch Length	12 mm
Needle System	134-35
Needle Thread Tension	Adjustable
Lubrication	Automatic
Type	Industrial Sewing Machine
Max Sewing Speed	3000 stitches per minute
Presser Foot Lift	20 mm
Power Requirements	230V/50Hz