Eaton easy500, easy700

4 Wiring  with
4.3 Function Relays
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 79
▶ Press the cursor button until the cursor is on the plus sign on the right of
the
S (setpoint value).
▶ Press the OK button.
▶ Press the
í button.
▶ Use
í to move the cursor onto the tens digit.
▶ Use
Í Ú to modify the value of the digit.
▶ Confirm the value input with OK.
▶ Press ESC to return to the circuit diagram, the setpoint 0010 will be
stored.
▶ Enter the circuit diagram up to coil
TT1 of the timing relay. Set the
parameter for
T1.
The timing relay operates as a flash relay. The easy symbol for the flasher/
blink relay is
Ü. It is set at the top left of the parameter display. S means here
the time base second.
▶ Select the
Ü symbol by pressing the Ú button.
▶ Use the
í to move to the first time setpoint I1.
C1 N +
S +0
C1 N +
S 00000
C1 N +
S 00010
C1 N +
S 00010
I5-------CC1
Í
￫
easy has specific parameter displays for function relays. The
meaning of these parameters is explained under each relay
type.
I5-------CC1
I6-------RC1
C1-------TT1
T1 X S +
I1 +0
I2 +0
T:
T1 Ü S +
I1 +0
I2 +0
T:
T1 Ü S +
I1 +0
I2 +0
T: