4 Wiring with
4.3 Function Relays
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 81
Power flow of the circuit diagram
Doubling the flashing frequency:
▶ In the power flow display select
T1.
▶ Press OK.
▶ Change the set time
I1 to 00.500 and I2 to 00.250 (0.5 and 0.25
s).
▶ The set time will be accepted as soon as you press OK.
The character on the left of the bottom row will indicate whether the contact
has switched or not.
•
# Contact has not switched (N/O contact open).
•
â Contact has switched (N/O contact closed).
You can also modify parameter settings via the PARAMETER menu option.
I5-------CC1
I6-------RC1
C1=======TT1
T1=======ÄQ1
T1 Ü S +
S1 00.50
S2 00.25
â T:00.200
￫
If you want to prevent other people from modifying the
parameters, change the access enable symbol from + to –
when creating the circuit diagram and setting parameters. You
can then protect the circuit diagram with a password.
To Next Page
Loading...
