Eaton SmartWire-DT SWD Series - Page 196

7 Pilot devices M22-SWD…
7.3 M22-SWD base fixing
192 SmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com
These functional elements contain a changeover contact and an LED ele-
ment in the colours white, blue, green and red. They replace previous combi-
nations consisting of a contact element M22-KC01 or -KC10 and an M22
LEDC... element. They are used in combination with illuminated pushbuttons
or selector switch buttons.
M22-SWD-K22LEDC… (multiple function elements)
These functional elements contain two changeover contacts and an LED ele-
ment in the colours white, blue, green and red. They replace previous combi-
nations consisting of several contact elements M22-KC01 or -KC10 and an
M22-LEDC... element. They are used in combination with luminous 3-posi-
tion selector switches.
All combination options for M22 front elements with SmartWire-DT base
function elements are listed in the following table.
Table 52: combination options M22 front elements with
SmartWire-DT-Function in base fixing
The SmartWire-DT function element always occupies the middle slot. If
required, standard M22-KC10/KC01 contact elements can also be plugged
into the free slots.
The following Table 53 shows what possibilities there are.
￫
There is no possibility of connecting an M22S-WJ4 joystick ele-
ment.
front element SWD function element
(Base fixing)
M22(S)-PV(T) M22-SWD-KC11
M22(S)-PVL(T)
M22-SWD-K11LEDC
M22(S)-DDL
M22-SWD-K22LEDC
M22(S)-D(R)(H)
M22-SWD-KC11
M22(S)-D(R)P
M22-SWD-KC11
M22(S)-W(R)K
M22-SWD-KC11
M22(S)-WKV
M22-SWD-KC11
M22(S)-W(R)K3
M22-SWD-KC22
M22(S)-W(R)S-(SA)
M22-SWD-KC11
M22(S)-W(R)S3-(SA)
M22-SWD-KC22
M22(S)-L(H)
M22-SWD-LEDC
M22(S)-D(R)L(H)
M22-SWD-K11LEDC
M22(S)-W(R)LK
M22-SWD-K11LEDC
M22(S)-W(R)LK-3
M22-SWD-K22LEDC
M22(S)-WLKV-3
M22-SWD-K22LEDC