Step 2: Driver installation
During the first connection of the controller to the PC, the "Scan for new hardware wizard" opens. Please follow
the instructions of the wizard:
Step 3: Perform firmware installation
Under "Start / Programs / ECKELMANN / Firmware Uploader", start the program "KGL Firmware Uploader".
The following window opens:
Click the "Find Controller" button to find the controller.
No error message such as "USB device not found" should be displayed on the laptop or PC.
Otherwise, tips for rectifying driver problems are explained in more detail in the chapter Rectification of
driver problems.
To Next Page
Loading...
